Home > Please Help > PLEASE HELP! 8400M GT / Ext Display HDMI

PLEASE HELP! 8400M GT / Ext Display HDMI

Why is that? Added OpenGL 4.1 support for Quadro Fermi, GeForce GTX 4xx, and later GPUs. It's definitely fast enough for my needs and it would be shame to scrap it. This info might help you in getting the proper result.

ChristopherMarch 18th, 2006, 07:06 PMHi, as stated here: http://ubuntuforums.org/showthread.php?t=75074 You have to comment out the options marked in red (adding a # before it, like I did). Fixed several cosmetic issues in the clock control user interface of nvidia-settings. Basic functionality doesn't work well: vpn, docking, hibernation. Users browsing this forum: No registered users and 0 guests You cannot post new topics in this forumYou cannot reply to topics in this forumYou cannot edit your posts in this

My xorg.conf included this: Section "Monitor" Identifier "aticonfig Monitor 0" HorizSync 31-101 VertRefresh 60-160 # V-freq: 85.00 Hz // h-freq: 94.05 KHz Modeline "1400x1050" 211.42 1400 1512 1768 2248 1050 1050 See this excellent tip (http://www.ubuntuforums.org/showpost.php?p=679706&postcount=23) from henriquemaia (Thanks!) How to edit xorg.conf file Run in terminal or console: sudo nano /etc/X11/xorg.conf online help in nano: ctrl+g (ctrl+x exits) Where is the http://ubuntuforums.org/showthread.php?t=24923 (855resolution, hoary) http://www.x.org/X11R6.8.2/doc/i810.html Laptop with Intel graphics and widescreen http://ubuntuforums.org/showthread.php?t=351647 Widescreen http://ubuntuguide.org/wiki/Ubuntu:Feisty#How_to_enable_Large_Widescreen_Suppo rt Useful command line tools xresprobe [driver=vesa,ati,nv,nvidia,i810] ddcprobe Why must I set the correct screen resolution on every

heimoFebruary 20th, 2006, 05:39 AMThis is a bit too involved for me. A couple of weeks later, I received it in the mail after they looked at it. Other drivers, vesa, nv and so on, can coexist without problems and you can change between those just by editing Driver line in xorg.conf Hopefully this cleared something, I welcome all ubuntuzillaNovember 11th, 2005, 04:37 AMthanks for the response.

I don't know if the ati drivers you've installed included this, but it seems to be also in package fglrx-control. I have tried two different LCD panels and another ribbon/cable but problem still persisted. Whilst we have had tremendous success against the retailers I have to state that I am not a Lawyer and do not profess to be. http://newwikipost.org/topic/S9gvj9EygiFL6EWD9g4djdEskUWuTVkX/3-display-set-up-different-screen-sizes-1-VGA-and-1-HDMI.html If you have, say, a laptop with a 1600x1200 screen that is only 15 inches across you need to edit the section dealing with the monitor in order to set the

Thank you very much. :) fangoriousMarch 1st, 2006, 08:40 PMI added some Modelines for 1680x1050 and 1440x900 at 60 Hz, and I can at least get those resolutions now. Excellent post. :KS I hope I can help, but am not sure. Edit xorg.conf and put correct values to your xconf.org's Monitor section. I connected an hdmi cable from my laptop (also 1080p full via 8400M GT) to the TV.

In beginning of September this year my screen of my VAIO AR71M (with NVIDIA GeForce 8400M GT) became yellow. ( link to model specification: http://www.sony.co.uk/support/en/product/VGN-AR71M/specifications )Not sure if I can describe Now they are correctly reported as 30, 24, and 15 bit formats respectively as required by the GLX and EGL specifications. VertRefresh ?-? Change between virtual consoles with CTRL + F1 F2 F3 and so on - your X should be on F7.

xinit: unable to connect to X server xinit: No such process (errno 3): unexpected signal 2. I want to be able to connect an external monitor and use it to extend my desktop. really complete The first 2 links under Integrated Intel graphics card? The xserver-xorg reconfigure generated this one Modeline Modeline "[email protected]" 83.91 1280 1312 1624 1656 800 816 824 841 After booting all the way into gdm and logging in, I go to

So I logged in with username and password and typed the command sudo dpkg-reconfigure xserver-xorg and it manually took me through it and then i copied and pasted my xorg.conf here. After installing the Ati driver and rebooting into single user mode, I ran 'sudo dpkg-reconfigure xserver-xorg' and specified the HorizSync and VertRefresh from the linked pdf, and selected these resolutions: 1920x1200; Booting in safety mode or even with drive containing different Windows version doesn't make difference, nor various nVidia drivers. The more people we can help the better.Please note that I am not legally qualified and I only offer my own personal advice.

xinit: unable to connect to X server xinit: No such process (errno 3): unexpected signal 2. i have had *constant* problems with the wireless and video card drivers. geearfFebruary 5th, 2006, 04:08 PMHello, I have a little problem now, the resolution / refresh rate is okay, but I have to set it back everytime I start KDE.

vincent orangeMarch 10th, 2006, 06:30 PMexcellent thread it helped me with my monitor problems, thank you bigunsMarch 15th, 2006, 01:06 PMA great thread like this is like a gift that keeps

Is there some other way to get the driver to ignore the EDID? Adding custom modeline If you know what your monitor can do, for example [email protected], you can use this page to generate a custom Modeline for you xorg.conf: online modeline generator (http://www.dkfz-heidelberg.de/spec/linux/modeline/) Updated the minimum required version of GTK+ from 2.2 to 2.4 for nvidia-settings. One thing however.

Still stuck at 60 Hz. Sony VGN-FZ290 laptop w/ HDMI port. 4GB Memory Nvidia 256MB Dedicated 8400M GT (up to 2560x1200 resolution), fully 1080p capable. Hordriss January 4th, 2017 03:43 AM by Ensign Tzap 8 247 How to Keep Epson WF-3640 Wireless Printer "Online" w/ Windows 8.1? See the README for more detailed instructions.

So now on to the Linux supported resolutions and refresh rates. Tv recognize my VAIO and vice versa but no video on TV screen.However when I connect it via VGA output everything works just fine no yellow lines/tint. As most newbies wouldn't know what to do if their X is lost, it's better to do sudo xinit -- :2 where one can see the result on a new X Section "Module" #Load "GLcore" Load "bitmap" Load "ddc" #Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Other thing, if you're using Nvidia proprietary driver,

This time I think I am in over my head, however, and it's the first time I've been forced to post a thread asking a PC question.The SituationI bought a computer Backup your configuration file sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup How to reconfigure Xorg Notice that auto detection of devices works best if Xorg is not running. If CTH has helped you, please consider liking and sharing us on Facebook Search Forums Show Topics Show Posts Advanced Search Go to Page... I also checked "Init Display First" and the current selected default was "PCIEx16," which was also correctly selected.3.

Also, try to get as much information about your monitor as possible (horizontal and vertical maximum and minumum refresh rates, maximum pixel clock and so on as stated on the manual). Section "Module" #Load "GLcore" Load "bitmap" Load "ddc" #Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Other thing, if you're using Nvidia proprietary driver, Ah, I'll check in the file. I didn't need a minor degree in computer science to change the resolution in that!

To stop it, when you are already in it, press CONTROL+ALT+BACKSPACE. I just want to make a small suggestion. My expectation was that it would either run at 75 Hz or not even load X. Change the DefaultDepth to what you would want it to be, 16 (65536 colors) or 24 (16M colors).

Very useful, not having to restart the computer and all :P could have saved me half an hour at least as I'm working with this xorg stuff eprebysJanuary 30th, 2006, 04:00 Added support for the GLX_EXT_stereo_tree extension.For more details, see the extension specification: http://www.opengl.org/registry/specs/EXT/glx_stereo_tree.txtEnabled support for using Unified Back Buffer (UBB) and 3D Stereo with the composite extension on Quadro cards.Using stereo Do you own a laptop with the same/similar problems? I'm quite happy to see that there's not so much need for this guide anymore, Xorg configuration in Breezy is working better than it was in Hoary.