Home > Hard Drive > Boot With Sata Hd

Boot With Sata Hd

Contents

SATA controllers typically appear under the SCSI and RAID controllers or Storage controller sections of Device Manager, while hard drives can be found under the Disk drives section. And it will be dirt slow.You can't just take a drive with a Windows OS on it, slap it in an external box, and hope it boots.It won't. Connect again your "broken HDD" and it will boot. Ask ! have a peek at this web-site

General Information .................... The moderboard model is K56CA. IT HELPED ME ! When you install a second hard drive in a PC, it shouldn't get in the way of the original drive’s boot process. http://www.tomshardware.com/forum/167877-32-make-sata-boot-issues

Hard Drive Detected In Bios But Won't Boot

However, when I connect it to USB using a SATA to USB adapter and reconfigure my BIOS to boot from USB, it does not boot. It worked for me to. Finally, I decided to install windows using Win7 DVD and the bios options recovered after the installation! HOWEVER...Strangely enough if you *clone* a Windows OS to a USBEHD (or USBESSD) the OS *will* be bootable from the USB device.

GimpyNov 14, 2005, 7:43 AM I got a 300gb Maxtor and it came with no jumpers!!! I have two SATA connectors on the motherboard, so the SATA drive is plugged directly into that. –Kevin Sep 11 '12 at 14:07 With SATA you do not have I would then do a re-partition and reformat on the old drives. Make Hard Drive Bootable Products ...............

A few years ago, before SATA, adding a second hard drive was made more complicated due to the fact that PATA (also known as EIDE) required a master/slave relationship. Thank you! No proble about ir,Next If you want to make partition on sata, Just copy Diskmanager Software (DM Utility from Seagate Or Samsung) Copy it into pendrive. https://www.cnet.com/forums/discussions/installing-new-sata-hdd-as-bootable-and-how-to-partition-400550/ In my BIOS setup i can only select SATA as boot-option, not the order of the disks.

OMG! Ide Drive Maybe it is just the bios which can't handle sata on start up (anymore). and what I get... It also assumes that you have not used the SATA controller in the operating environment before and, as a result, the applicable SATA controller driver(s) are therefore not installed.Given the above

How To Make Ide Boot Instead Of Sata

Select forumWindowsMac OsLinuxOtherSmartphonesTabletsSoftwareOpen SourceWeb DevelopmentBrowserMobile AppsHardwareDesktopLaptopsNetworksStoragePeripheralSecurityMalwarePiracyIT EmploymentCloudEmerging TechCommunityTips and TricksSocial EnterpriseSocial NetworkingAppleMicrosoftGoogleAfter HoursPost typeSelect discussion typeGeneral discussionQuestionPraiseRantAlertTipIdeaSubject titleTopic Tags Select up to 3 tags (1 tag required) CloudPiracySecurityAppleMicrosoftIT EmploymentGoogleOpen SourceMobilitySocial EnterpriseCommunitySmartphonesOperating http://www.tomsguide.com/answers/id-1850390/bios-boot-hdd.html That means no jumpers to set and no fear of getting it wrong. Hard Drive Detected In Bios But Won't Boot Benevolent DeityMay 30, 2015, 3:20 AM USAFRet said: Quote: I have a SATA HDD with Windows 8.1 installed and when connected via SATA it boots the OS just fine and everything Reboot And Select Proper Boot Device So, my main question is what is different about a bootable SATA HDD connected via a USB adapter and a device specifically prepared to boot from USB that would cause this

I had exactly the same problem. BIos only has AHCI and RAID for SATA options0HDD not booting over SATA, only over USB Hot Network Questions How to add a deep chasm-type hazard to an encounter without risk hard-drive boot sata share|improve this question edited Sep 11 '12 at 19:40 asked Sep 11 '12 at 5:56 Kevin 6113 Are you sure your original boot drive is broken? Only possible problem could come about if you use one of the crappy IDE Drives that fails every few months that would give you a Issue but with the better ones No Bootable Device

Sorry, there was a problem flagging this post. unksol said:Enable CSM. Is it possible to make an alloy that melts at low temperatures and solidifies at high temperatures? These come with several SATA Connectors On Board generally 6 or 8 but that number can vary depending on who makes the M'Board and only 1 2 Channel IDE Port so

General Information Knowledge Base > Hardware or BIOS > How to Switch from Booting an IDE Hard Drive to a SATA Hard Drive How to Switch from Booting an IDE Hard Windows Boot Manager How to Ghost from IDE0 master and make SATA drive C:? Or am I mad?

And PXE OpROM?

It's a real bummer to run into all these problems that I don't know how to fix. by caes4 · 8 years ago In reply to Some Driver Makers use th ... And you can plug them in 1 by 1 so you can test if are achieving the boot sequence you want! –aliasgar Sep 11 '12 at 14:12 | show 10 more Inaccessible Boot Device unksol said:Enable CSM.

I saw this on PC Advisor and thought you should see it too. solved which two ports types are used to connect to an intetnal HDD? What's even more confusing is that I formatted the SATA drive in Windows yesterday while running off my IDE Hd and successfully copied files to it... Do you know specifically what is different about this that allows such a boot?

cant finde way to fix it JerryJFJul 20, 2015, 2:25 AM try unplug all other sata connectors leaving just ur ssd connected to the sata port used by ur original hdd, I just upgraded my system to the following:Athlon 4000+MSI Neo2 K8T AGP (Had a X800XT AGP from a while back...)2GB Corsair TWINXX PC3200 400mhz250GB Seagate Baracuda 7200.8 SATA RAID HDThe problem I just got a new SATA hard disk (500GB) and installed Win XP on it..... More about : bios boot hdd Reply to 3AgL3_DeeJay smorizio a c 214 Ĉ ASUS a b D Laptop October 21, 2013 9:50:42 PM http://dlcdnet.asus.com/pub/ASUS/nb/K46CA/E7596_eManual...

ArtPogMay 30, 2015, 2:44 PM As USAFRet has pointed out, the Windows OS will balk when attempting to install the OS onto a HDD/SSD connected as a USB device. Use an appropriate TeraByte Unlimited product (e.g.Image for DOS, Image for Linux, Image for Windows) to copy the contents of the IDE hard drive over to the SATA hard drive. So I cancelled and continued with the setup process. Finish install windows with all drivers and updates and such.

is this normal?if I am able to install onto the SATA drive doesnt that mean that it already has the sata drivers installed anwayys? 0Votes Share Flag Collapse - Some Driver Might post the question there as well. OMG! Reply to smorizio m 0 l Best solution unksol a b D Laptop a b Ĉ ASUS October 21, 2013 10:28:54 PM Enable CSM.

Since there's no master / slave setup, there is no 'master' hard drive. I set the jumpers according to the diagrams on the drives, so that the boot drive is master and the data drive is slave. you might also check with TheChas here on TR. If you will be attaching the SATA drive to the mainboard, enable any applicable mainboard jumpers and/or BIOS settings.

The solution was in the the power menu - APM (which I take to mean Automatic Power Management) - Enabled - I changed this to Disabled and everything worked fine - Simply turn on your PC, press the Del key a few times (or look for a message telling which key to press to enter Setup) and the BIOS should appear. USAFRetJun 27, 2015, 1:39 AM hellerius said: Rather than plugging a USBEHD with Win installed, what if I put a raw SSD in a good USB enclosure, and then did a I have the exact same problem: my HDDs are listed in the Advanced SATA configuration, but not in the Boot option priorities...

Ok then i probalby dont need the sata disk?because when i enter windows install it sees both hard drives but as long as I have the cdrom to boot before the It worked!